Perth EarthmovingEarthmoving and excavator hire, with operator Call 1800 800 227
Home / The machine

JCB 1CXT compact tracked backhoe

1.80 m wide, 4.3 tonnes, digs up to 3.08 m. A loader and excavator in one machine.

The JCB 1CXT is a tracked backhoe loader: a skid-steer loader on the front and a full backhoe on the back, on one compact chassis with rubber tracks. It does the work of a small excavator and a bobcat in one visit.

Specifications

SpecFigureWhy it matters
Width1.80 mFits through most residential side gates and laneways
Length3.57 mManoeuvres in tight backyards
Operating weight4.3 tLight enough for lawns, verges and soft ground
TracksRubberLow ground pressure, minimal rutting or compaction
Dig depthup to 3.08 mDeep enough for pools, soakwells and services

Checking your access

Measure the narrowest point between the street and the dig, including gate posts, downpipes, meter boxes and eaves. If it's wider than 1.80 m with a little room to spare, the machine will fit. Send a photo with your booking if you're unsure.

Why tracks instead of wheels

Rubber tracks spread the machine's weight, so it works on lawn, sand and wet ground without leaving ruts. That's why it suits wetlands, verges and finished gardens.

Common questions

Is it an excavator or a bobcat?

Both. The front works like a skid-steer loader and the rear is a full backhoe, so one machine digs, loads and levels.

Will it damage my lawn?

It's on rubber tracks with low ground pressure, so damage is minimal. Very soft or wet lawns may still mark.

Check your dates

We confirm availability within one business day. Nothing is booked until we confirm.

CallCheck dates